Jet engine

BEngAero-Mechanical Engineering

Why this course?

Mechanical engineers are recognised for their knowledge and skills in conceiving, designing, implementing and operating devices, machines, engines and energy systems.

You'll learn how to design aircraft engines, control systems, landing gear and about the many complex parts which sustain flight.

Many of the aero-related topics, such as aerodynamics and lightweight structures, are of special interest and value to a wide variety of engineering activities outside the field of aeronautics.

Graduates from the Department of Mechanical & Aerospace Engineering - which is consistently rated in the top 10 such departments in the UK -  are part of a new breed of engineer who can take on challenges ranging from traditional industries to areas such as new materials, sustainable development and aerospace.

Study abroad is an option for all Mechanical Engineering courses. 

What you’ll study

All students experience the same learning pace in the first two years and BEng students can, and often do, transfer to the five-year MEng programme. The Aero-Mechanical courses diverge from the core earlier to develop specialist themes.

Studying BEng Aero-Mechanical Engineering you'll learn about:

  • aerodynamics
  • flight & spaceflight mechanics
  • aero-propulsion systems
  • gas dynamics
  • computational fluid dynamics
  • materials for aerospace applications
  • aero-elasticity
  • lightweight structures

Formula Student

Many of our students participate in activities such as the Formula Student, the national competition to build a Formula Student racing car (at which Strathclyde is the top-performing Scottish university).

Other activities include Outdoor Management Skills course at Outward Bound Scotland, the British Model Flying Association’s University Challenge, and ‘Gala,’ the annual employers’ networking dinner.


Accredited by the Institution of Mechanical Engineers (IMechE) on behalf of the Engineering Council for the purposes of fully meeting the academic requirement for registration as an Incorporated Engineer and partly meeting the academic requirement for registration as a Chartered Engineer.

Accredited by the Royal Aeronautical Society (RAeS) on behalf of the Engineering Council for the purposes of fully meeting the academic requirement for registration as a Chartered Engineer.

Course content

Year 1

Compulsory classes

Engineering Mechanics 1
Knowledge of mechanics is a fundamental tool for a mechanical engineer. This introductory class aims to investigate classical mechanics - force, motion, energy, work and momentum – from a conceptual viewpoint to understand how these are connected and how they can be applied, through formal problem solving, to real-world engineering.
Electrical Circuits
Mechanical systems rely upon electrical and electronic circuits for many reasons: the delivery of drive power; sensing temperature, pressure etc.; the delivery of sensor data for condition monitoring, control and operation. This course covers how external data is acquired, conditioned and used and will equip students with an understanding of the basic theories underlying electronics.
Heat & Flow 1
Knowledge of thermodynamics, heat and fluid flow are important for the understanding and design of thermal and hydraulic systems involving energy conversion and transmission, such as engines and turbines, pumps and compressors, and associated pipework. This class introduces the basic concepts and applications of thermodynamics and fluid mechanics, as a foundation for further studies.
Mechanical Engineering Design
The aim of this class is to place the essential elements of design at the heart of courses for mechanical engineering students. It shows how the disparate elements of engineering science may be brought together and used to create a safe, durable and cost-effective solution to a perceived engineering need. This course continues in later years.
Experimental & Laboratory Skills
This class introduces students to a range of experimental and laboratory related skills appropriate to mechanical engineering. This includes elements of laboratory and workshop safety including risk assessment. Students will gain familiarity with a range of hand tools and welding/joining procedures and develop an understanding of how to conduct experiments, record data, evaluate errors and write technical reports.
Engineering Analysis & Numerical Methods
This module aims to give a basic introduction to some of the tools of engineering analysis used in the course through relevant application software in an engineering context. This module aims to teach the basic principles of programming and the solution of mathematical problems with numerical techniques in an engineering context. Specifically students will be introduced to the engineering numerical simulation software MATLAB, which is widely used in industry and research. This course continues in later years.
Mathematics 1M
This class aims to review and extend the student’s basic understanding of the concepts and applications of mathematical functions, differentiation, complex numbers, vectors, integration and matrices. Specifically: the mathematical foundations of algebra and geometry, vector algebra, further studies in complex numbers and fundamental calculus including differentiation & integration. This topic continues into the second year of the course.

Elective classes

During the first year of the course students take at least 20 credits (out of a total of 120 credits) of elective classes from topics in modern languages, engineering, science, business, bioengineering and others (depending on timetable availability).

Year 2

Compulsory classes

Flight & Spaceflight 1
The first year of this class aims to give a theoretical and historical background to the development of modern aircraft and spacecraft design. It covers the history of flight, basic aerodynamics (lift, drag, thrust and bluff bodies), flight instruments and the fundamentals of spaceflight (history of rocket development, rocket engines, multi-staging and escape velocity)
Engineering Mechanics 2
The second year of engineering mechanics aims to develop the skills to analyse more advanced dynamics problems associated with solid bodies and simple mechanisms and introductory knowledge in new topics of structural analysis and basic stress analysis: static equilibrium, shear force and bending moment diagrams, beams in bending, shear and torsion and 2D stress and strain.
Professional Studies
The aim of this class is to create awareness of, and develop some of the skills, expected in graduate professional engineers. These include development of communication skills, self-awareness and group working skills, professional conduct, ethics and the legal aspects of professional responsibility, engineering ethics and societal and contemporary issues.
Electrical Machines & Control
Engineering students from non-electrical disciplines often require a working knowledge and appreciation of electrical power devices and their use. This class develops the theory underlying simple electrical circuit analysis, transformers and electrical motors, and seeks to develop an understanding of their application through example and laboratory work.
Aero Design

This class builds on the initial work carried out in Flight and Space Flight 1. The taught part of the class is reinforced by experimental investigation, flight experience and flight test. The class also introduces the mathematical modelling tools you will require in the third-year aero design class. Topics covered include: aircraft design; airworthiness and the flight envelope; static, longitudinal stability and control of aircraft is considered; and the standard atmosphere – variation of temperature, pressure and density with height is explained.

The calculation of the performance of aircraft is studied: indicated and true airspeed; steady level flight – minimum drag and minimum power flight speed; steady glide and climb; take-off and landing; steady turning flight; range and endurance; flight and gust envelopes.

Heat & Flow 2
This class continues the study of fluid mechanics and thermodynamics. The behaviour of fluids is an important aspect in the performance of engineering systems: the underlying physics of fluid flow and its application to simple systems is presented. Thermodynamics is the science that is devoted to understanding energy in all its forms and how energy changes form; the aim of is to supply the necessary analytical tools to study these changes when applied in engineering situations, in particular for transportation and power production.
Mathematical Modelling & Analysis
This class develops a general approach to the solution of engineering problems and involves mathematical modelling, numerical methods and the application of computer software. A wide range of engineering topics is presented and includes problems in structures, dynamics, fluids and heat transfer to emphasise the general applicability of the solution processes with practical application using Mathcad.
Materials Engineering & Design
The class aims to provide basic concepts of material science and engineering for mechanical design and materials selection. Topics include: the structure of solids, strength and stiffness of engineering materials, metals and alloys, strengthening mechanisms and heat treatment, ductile and brittle failure, elasticity, plasticity and creep, fracture toughness, linear elastic fracture mechanics and fatigue.
Mechanical Engineering Design 2
The study of engineering design continues to develop understanding of the design process and effective design procedures. This module aims to cover two aspects of mechanical design. Firstly, to develop competency in mechanism design using the PTC Creo software suite including part creation, assembly and drawing creation competencies. Secondly, to develop competency in materials selection for engineering design, using the CES Selector software.

Year 3

Compulsory classes

Aero-Design 2
The class consists of a semester-long design/build/test group exercise. The projects available each year will depend upon the staff involved in this class. A typical project, which might be available, is the BMFA “University Challenge”: Groups of approximately 5 students design, build and test a small-scale remote control aircraft to take part in the BMFA University Challenge. Over the 12 weeks of the semester, the groups will develop their design, build, test and optimise the design. The aircraft are taken by the teams to fly off in the competition held at Elvingon Airfield, York, in June. A small budget is allocated to each group.
Structural Mechanics
This class is a continuation of the structures element of class 16232. Topics include: two-dimensional stress and strain; multi-axial elastic constitutive relations and yield criteria; general equations of elasticity leading to classic solutions for thick and thin cylindrical structures; further analysis of beams; energy methods of analysis; instability and buckling.
Flight & Spaceflight 2
The second year of this class builds on the initial work carried out in Flight and Spaceflight 1 and Aero Design 1 and is intended to introduce students to the mathematical modelling tools they will require in the third year design class. Experimental Aerodynamics is introduced and the experimental methods used by researchers in this area are explained. It also introduces the mathematics of flight simulation and the technology involved in flight simulator hardware and software including longitudinal stability and control.
Dynamics & Control
The first part of this class is a continuation of the dynamics element of class 16232 including principles of the kinematics of rigid bodies; equations of plane motion; angular momentum; vibration of mechanical systems with laboratory practice and demonstrations. The second part aims to introduce control theory and the modelling of linearized physical systems and design of feedback control systems.
Engineering Analysis III
This continuing class aims to introduce the theory and application of the two most widely used numerical methods in engineering analysis: Finite Element Analysis (Structural & stress analysis and the commercial FEA program ANSYS) and Computational Fluid Dynamics (Analysis of flow field; recirculation zones/stagnation points; boundary layers and an introduction to the commercial CFD program FLUENT).
Heat & Flow 3
This class builds on the students’ previous study of thermodynamics and heat transfer to cover: mixtures, psychrometry, exergy and its applications; conduction, convection and radiation in heat exchanger design. The study of the laws of conservation of mass, energy and momentum moves to a more advanced level and knowledge of fluid flow is extended to provide an appreciation of boundary layers and fluid flow in rotating machinery.
Strategic Analysis of Engineering Business Case Studies
An introduction to the concept of the conscious pursuit of competitive advantage by engineering businesses is developed in this class. Following introductory lectures and case studies, students work in groups to analyse and prepare for presentation a selection of engineering business cases from a variety of sources, moderated by industrial mentors.
Engineering Ethics
The study of engineering ethics helps students prepare for their professional lives and to develop widely applicable skills in communication, moral reasoning and reflection in order to engage with other aspects of the course such as group work and work placements. This class follows the approach outlined for the teaching of Engineering Ethics recommended by the Royal Academy of Engineering using case studies.

Year 4

Compulsory classes

Case Studies in Engineering
Professional engineers need to have an awareness of the impact of engineering and technology on society. This class provides this awareness through case studies presented by senior representatives from industry, and visiting academics, from a spectrum of engineering industries to cover project management, technical sales, planning and industrial relations and more traditional topics.
Computer Aided Engineering Design
This class continues class 16363 and aims to provide an appreciation of computer aided design, analysis and simulation methods over a range of engineering problems and to provide practical experience of the use of industry standard engineering simulation and analysis software to design and investigate the behaviour and performance of specific systems or components.
Engineering Materials Selection
Engineers must be aware of the importance of materials selection in the design process. An introduction to the philosophy of materials selection in design is given. Consideration is given to the various classes of available engineering materials, with some background to the underlying factors that determine their general properties, providing an overview of their general or specific properties and an insight into their uses and selection criteria for design.
Individual Project - Aerospace
Students pursue an intensive research, development or design project under the supervision of a member of academic staff to produce a major dissertation and technical paper. The project should be on an aerospace related topic. At the end of both semesters, panels of academic staff conduct oral examinations to assess student performance and the technical paper. The supervisor assesses the work separately.
Advanced Mechanics & Dynamics
The aims of this class are two-fold: to develop the students' ability to apply analytical techniques to the solution of engineering problems where dynamic behaviour is important and to provide practical experience in designing lightweight structures to ensure that they have sufficient strength and stiffness to prevent failure, particularly by buckling, when in service.
Heat & Flow 4
An understanding of heat, mass and momentum transfer processes is a basic requirement for practising engineers. This class aims to build upon the students' previous three year’s exposure to the basic energy transfer mechanisms of conduction, convection and radiation so that multi-dimensional, steady state and transient problems can be recognised and analysed.
Aerospace Propulsion
This class provides an understanding of the principles of propulsion systems for aircraft. The procedure and methodology for designing a propulsion device, starting from the aircraft concept and the associated engine requirements, through to the aero-thermal design of engine components is presented and discussed. Using a combination of lectures and project-based activities, you'll develop an understanding of the design process and the performance of aerospace propulsion systems.


Our assessment methods include:

  • written exams
  • coursework assignments
  • presentations
  • individual/group projects

The final award classification is normally based on inputs from first assessed attempt at compulsory and specified optional classes across all years, except Year 1, plus, if appropriate, an oral exam.

Learning & teaching

In the early stages, learning skills are developed through interactive teaching, problem solving and problem-based learning. In later years, you'll take part in lectures, tutorials, web-based interactive learning, practical work and computer based learning. The emphasis on individual and group projects increases as our students’ skills develop.

Entry requirements

Minimum grades

Required subjects are indicated following minimum accepted grades.


AAAB (Maths A, Physics A)

Advanced Highers

Maths and Physics recommended

A Levels

Year 1


Typical entry requirements: ABB

Year 2 entry


Typical entry requirements: AAA (Maths A, Physics A)

International Baccalaureate

32 (Maths HL5, Physics HL5)

Additional information

  • Deferred entry is not accepted
  • Applicants likely to be made an offer are normally invited to visit the Department between December and February


Widening access

We want to increase opportunities for people from every background. Strathclyde selects our students based on merit, potential and the ability to benefit from the education we offer. We look for more than just your grades. We consider the circumstances of your education and will make lower offers to certain applicants as a result.

Find out if you can benefit from this type of offer.

International students

Find out entry requirements for your country.

Degree preparation course for international students

We offer international students (non EU/UK) who do not meet the academic entry requirements for an undergraduate degree at Strathclyde the option of completing an Undergraduate Foundation year programme at the University of Strathclyde International Study Centre.

Upon successful completion, you will be able to progress to this degree course at the University of Strathclyde.

Fees & funding

How much will my course cost?


All fees quoted are for full-time courses and per academic year unless stated otherwise.

  • £1,820
Rest of UK
  • £9,250

Assuming no change in Rest of UK fees policy over the period, the total amount payable by undergraduate students will be capped. For students commencing study in 2017/18, this is capped at £27,750 (with the exception of the MPharm and Integrated Masters courses); MPharm students pay £9,250 for each of the four years. Students studying on Integrated Masters degree programmes pay an additional £9,250 for the Masters year with the exception of those undertaking a full-year industrial placement where a separate placement fee will apply.

  • £20,050

Faculty of Engineering Excellence Scholarship (FEES) for International Students

If you're applying for an undergraduate course you'll be eligible to apply for a Faculty of Engineering Excellence Scholarship offering up to £4,000 towards your tuition fees for your first year of study and an additional £1,500 for each subsequent year.

The scholarship is available for application to all self-funded, new international (non-EU) fee paying students holding an offer of study for an undergraduate programme in the Faculty of Engineering at the University of Strathclyde. Please note you must have an offer of study for a full-time course at Strathclyde before applying.

You must start your full-time undergraduate programme at Strathclyde in the coming academic year (2019-20).

University preparation programme fees

International students can find out more about the costs and payments of studying a university preparation programme at the University of Strathclyde International Study Centre.

Additional fees 

Course materials & costs

Textbooks and printed materials

  • circa £400 cost for duration of course

Study abroad

Studying abroad is possible in third or fifth years - but compulsory for International Study.

Students will require to pay costs for studying abroad, which will vary dependent on country of study.

Please note: All fees shown are annual and may be subject to an increase each year. Find out more about fees.

How can I fund my studies?

Students from Scotland and the EU

If you're a Scottish or EU student, you may be able to apply to the Student Award Agency Scotland (SAAS) to have your tuition fees paid by the Scottish government. Scottish students may also be eligible for a bursary and loan to help cover living costs while at University.

For more information on funding your studies have a look at our University Funding page.

Students from England, Wales & Northern Ireland

We have a generous package of bursaries on offer for students from England, Northern Ireland and Wales

You don’t need to make a separate application for these. When your place is confirmed at Strathclyde, we’ll assess your eligibility. Have a look at our scholarship search for any more funding opportunities.

International Students (Non UK, EEA)

We have a number of scholarships available to international students. Take a look at our scholarship search to find out more.

Available scholarships

We have a wide range of scholarships available. Have a look at our scholarship search to find a scholarship.


With skills including analytical, numeracy and problem solving, graduates are suited to a wide range of career opportunities.

While almost all Aero-Mechanical students continue to graduate with MEng (five-year) degree, those who graduate with BEng Honours often enter sectors including:

  • aerospace
  • automotive
  • manufacturing
  • engineering consulting
  • armed forces
  • energy & environmental engineering

How much will I earn?*

£27,000 is the average salary of our graduates six months after completing the course.

The typical salary range is £25,000 to £30,000.

Where are they now?

80% of our graduates are in work or further study.**

Recent job titles include:

  • Graduate Mechanical Engineer
  • Acoustics Engineer
  • Design Engineer
  • Officer Cadet
  • Airline Pilot Trainee

Recent employers include:

  • British Army
  • GE Caledonian
  • Renewables Unlimited LLP
  • Sand Monitoring Services Ltd

*Information is intended only as a guide.

**Based on the results of the national Destinations of Leavers from Higher Education.


How to apply – 10 things you need to know

  1. All undergraduate applications are made through UCAS
    Go to the UCAS website to apply – you can apply for up to five courses.
  2. It costs £12 to apply for a course
    The cost is £23 for two to five courses.
  3. The deadline is 15 January each year
    This is the application deadline for most courses. However, please check the details for your particular course. View a full list of UCAS key dates.

    Applications are still welcome from international students (non-EU) and those living in England, Wales and Northern Ireland.
  4. You might be asked to attend an interview
    Most of our courses make offers based on the UCAS application. However some might ask you to attend an interview or for a portfolio of work. If this is the case, this will be stated in the prospectus entry requirements.
  5. It’s possible to apply directly to Year 2
    Depending on your qualifications, you might be able to apply directly to Year 2 - or even Year 3 - of a course. Speak to the named contact for your course if you want to discuss this.
  6. There’s three types of decision
    • unconditional – you’ve already met our entry requirements
    • conditional – we’ll offer you a place if you meet certain conditions, usually based on your exams
    • unsuccessful – we’ve decided not to offer you a place
  7. You need to contact UCAS to accept your offer
    Once you’ve decided which course you’d like to accept, you must let UCAS know. You don’t need to decide until you’ve received all offers. UCAS will give you a deadline you must respond by.

    You’ll choose one as your firm choice. If the offer is unconditional or if you meet the conditions, this is the course you’ll study.

    You’ll also have an insurance choice. This is a back-up option if you don’t meet the conditions of your first choice.
  8. You don’t need to send us your exam results (Scotland, England & Wales)
    If you’re studying in Scotland, England or Wales, we receive a copy of your Higher/Advanced Higher/A Level results directly from the awarding body. However, if you are studying a different qualification, then please contact us to arrange to send your results directly.
  9. We welcome applications from international students

    Find out further information about our entry and English language requirements.

    International students who don’t meet the entry requirements, can apply for our pre-undergraduate programmes.

    There’s also an online application form.

    For further information:
  10. Here’s a really useful video to help you apply

Discover more about Strathclyde